SLA-T01 Linear Actuator
SLA-T01 30mm Stroke Linear Actuator
This 30mm household miniature electric linear actuator is compact, lightweight, low-noise and robust, making it ideal for furniture, medical equipment and OEM motion applications. It supports 6V / 12V / 24V DC and delivers up to 188N (42 lbs) thrust at 5mm/s.
Key Specifications
SLA-T01
30mm
188N / 42 lbs
6V / 12V / 24V DC
84.5 mm
Product Overview
The SLA-T01 30mm stroke linear actuator is mainly used for medical beds, electric sofas, height adjustable desks, window openers, industrial automation, solar tracking systems and other household or OEM motion applications. It can open, close, push, pull, raise and lower these devices.
Key Features
- High-quality miniature linear actuator for household and OEM projects
- High-strength housing protects motor and gear
- Metal gearbox with high-strength wear-resistant gears
- Stainless steel telescopic tube and aluminum alloy outer tube for good corrosion resistance
- Strong thrust up to 188N / 19 kg / 42 lbs at 5mm/s
- Multiple speed options from 5mm/s to 150mm/s
- Stroke option for this model: 30mm
- Advanced waterproof and dustproof design (IP54)
- Low power consumption and low noise
- Built-in limit switches; actuator stops automatically at end of stroke
- Auto-locking capability holds load position after stopping without power
- Maintenance-free design
Operation
When the red power wire is connected to the power positive and the black power wire is connected to the power negative, the stroke rod extends outward. After reversing the power polarity, the stroke rod retracts inward.
Technical Parameters
| Parameter | Value |
|---|---|
| Model | SLA-T01 |
| Working Voltage | DC 6V, DC 12V or DC 24V (24V most commonly used) |
| Stroke | 30mm |
| Installation Length | 84.5 mm |
| Optional Speed (No-load) | 5±1mm/s, 7±2mm/s, 9.5±2mm/s, 15±3mm/s, 30±5mm/s, 50±10mm/s, 150±20mm/s |
| Max Load Capacity | 188N / 19 kg / 42 lbs at 5mm/s |
| No-load Current | 0.02~0.04A at 12V, 0.01~0.02A at 24V, 0.04~0.08A at 6V |
| Full Load Current | 0.2~0.3A at 12V, 0.1~0.15A at 24V, 0.4~0.6A at 6V |
| Recommended Power Supply | 6V/1A or 12V/1A or 24V/1A |
| Outer Tube Diameter | 12×16mm |
| Telescopic Tube Diameter | 6×9mm |
| Mounting Hole Diameter | 4mm |
| Housing Material | Zinc Alloy / Polyamide options |
| Stroke Rod Material | Stainless Steel |
| Outer Tube Material | Aluminum Alloy |
| Gear Material | Steel Alloy |
| Motor Type | Brushed DC Motor |
| Duty Cycle | 10% |
| Service Life | Approx. 50,000 cycles |
| Cable Length | 500±10%mm (customizable) |
| Certifications | CE |
| Environment Temperature | -26℃ to 85℃ |
| Operating Noise | About 45dB~55dB |
| IP Rating | IP54 (indoor use recommended) |
Different Speeds and Corresponding Maximum Thrust
| No-load Speed | Maximum Thrust |
|---|---|
| 5mm/s | 188N / 19 kg / 42 lbs |
| 7mm/s | 128N / 13 kg / 29 lbs |
| 9.5mm/s | 96N / 9.8 kg / 21 lbs |
| 15mm/s | 64N / 6.5 kg / 14 lbs |
| 30mm/s | 32N / 3.2 kg / 7 lbs |
| 50mm/s | 19N / 1.9 kg / 4 lbs |
| 150mm/s | 6N / 0.6 kg / 1.3 lbs |
Notes:
- Maximum load capacity is obtained when the actuator runs in the vertical direction.
- No-load speed is listed above; actual working speed decreases as load increases. Full-load speed is about 60–70% of no-load speed.
- Different speeds correspond to different maximum loads. Please select speed according to your application.
- Continuous operation under maximum load is not recommended. Running at about half of maximum load helps extend service life.
- Maximum pull force is slightly less than maximum thrust.
Need a Custom Configuration?
Contact Elerover for voltage, speed, stroke, cable length and connector customization for your OEM project.
